Geodesmo-50 is a one component, polyurethane based primer suitable for all substrates. It can be used successfully on both porous or non- porous substrates.
It is characterised by its very low viscosity and balanced curing speed which result in excellent wetting, impregnation and paint-over time on all
substrates, whether of high, low or no porosity (e.g. glass and metals). Additionally, it can be effectively used on both dry and wet concrete,
even green concrete, not only as primer but also as a low-cost sealing solution, increasing, thus, the durability of the substrate.
Apply with brush or roller.
On concrete 100-500 gr/m2, subject to substrate
To be used as primer for:
• Humid, damp or wet concrete,
• non-porous substrates
Also, for use as concrete sealer.
FEATURES & BENEFITS
• One component.
• Of low viscosity.
• Easily applied, even on wet concrete.
• Excellent wetting, impregnation and paint-over time.
• Many pigment pastes available.A low-cost solution for concrete sealing & protection.
Clean the surface using a high pressure washer, if possible. Remove oil, grease and wax contaminants.
Cement laitance, loose particles, mould release agents, cured membranes must also be removed.
In order to reduce the chance of bubble formation
and to help keep consumption below 500 gr/m2,
Apply with brush or roller. Once cured, the main
membrane (e.g. HYPERDESMO® System) can be
Concrete:100-500 gr/m2, subject to substrate porosity.
Due to the very high strength of adhesion of GEODESMO-50, avoid staining surrounding areas. Clean tools and equipment first with paper and
then using SOLVENT-01. Rollers will not be reusable.
1 kg, 5 kg, 25 kg and drums.
Can be kept for 12 months minimum in the original unopened pails in dry places and at temperatures of 5-25 oC. Once opened, use as
soon as possible.
GEODESMO-50 contains solvents. Appply in wellventilated,
no smoking areas, away from naked
flames. In closed spaces use ventilators and
carbon active masks. The M.S.D.S. (Material
Safety Data Sheet) is available on request.